Quick Answer: What Is Equivalent To 17mm Socket?

What is equivalent to 15mm socket?

SAE to Metric Conversion ChartSAEMetricInch9/16″0.56315mm0.59119/32″0.5945/8″0.62547 more rows•Apr 29, 2020.

How do you tell if a bolt is SAE or metric?

Metric and SAE fasteners are measured differently and with different vocabulary. SAE nuts, bolts and screws are measured by their thread count, or TPI (threads per inch) and their length. Metric fasteners are measured by length and pitch, or the distance between threads.

How do I know my socket size?

How to Determine the Right Size Socket for a NutTurn on the digital caliper and set it to read in inches, not millimeters. Set the nut on a flat surface. … Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.Check the caliper display. The reading shows the size of the nut as a decimal.

What is metric socket sizes?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Standard Deep Sockets (1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Deep Sockets (15, 16, 17, 18, 19, 21, 22)

What’s equivalent to a 13 mm socket?

Standard / Metric Wrench Conversion ChartBolt DiameterStandardMetric3/16″3/8″10mm1/4″7/16″11mm5/16″1/2″13mm3/8″9/16″14mm39 more rows•Aug 26, 2019

Which is better metric or SAE?

The metric measurement is more accurate than friction on an inch. … For more than 30 years, imported cars used metric measurement in them. ​SAE. The root of the SAE measurement comes from English or Imperial.

What are the most common socket sizes?

10mm sockets and 36mm sockets are typically the most commonly used sizes.

Is 24mm and 15 16 the same?

Not only is 15/16″ basically the same as 24mm, but 1 1/16″ is the same as 27mm.

What is the same as a 10mm socket?

The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard. Metric sizes, also known as SI (Système International), from the French International System.

What is a 12mm socket in standard?

11mm. 7/16 Inch. 0.43307 Inches. 12mm. Just short of 1/2 Inch.

What size is a 17mm socket?

Wrench Size And Conversion TableInchesMillimetersSpanner0.66917mm17mm0.68611/16 AF0.70918mm18mm0.7103/8 Wworth; 7/16 BSF65 more rows

What SAE and metric sizes are the same?

Sometimes. While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.

What is bigger 11/16 or 17mm?

17mm = almost 11/16 inch. … 21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.

Does Ford use SAE or metric?

Ford has a couple metric 12 point fasteners on their drive shafts as well. American cars haven’t been SAE in a long time. So what uses SAE?

What size socket is between 12mm and 13mm?

Metric Socket Sizes Chart1/4″ Drive3/8″ Drive1/2″ Drive12mm15mm18mm13mm16mm19mm14mm17mm20mm15mm18mm21mm18 more rows•Jul 13, 2020